4.7 · 55 Google reviews Mon–Fri, 7 AM–5 PM Greenville, OH · Serving western Ohio & eastern Indiana

Solar · Standing seam clamps

Can You Put Solar Panels on a Metal Roof?

Yes, and a metal roof is one of the best roofs to put solar on. On standing seam, the racking clamps onto the raised seams, so no holes are drilled through the roof, as EnergySage explains. Exposed-fastener rib panels can carry solar too, with mounts fastened through the panel into the framing and sealed. If your roof is near the end of its life, replace it before the panels go up.

By Isaac Smith, Brothers Metal Roofing · Updated November 2026

Close-up of silver standing seam metal roof panels and their raised seams

Why do standing seam roofs and solar fit together?

  • No holes. Seam clamps grip the raised seam, so the racking attaches without drilling through the panel.
  • A roof that outlasts the array. Metal roofs typically last 40 to 70 years, according to the Metal Roofing Alliance, so the roof under your panels is unlikely to wear out first.
  • Faster racking. With no holes to drill and seal, EnergySage notes installation can go quicker.
  • A thin-film option. EnergySage calls standing seam an ideal surface for thin-film solar, which bonds to the flat of the panel.

Our standing seam panels have a 1.5-inch seam. Ask your solar installer to confirm their clamp is made for that seam profile before anything goes on the roof.

Can you put solar on corrugated or rib panels?

Yes, with a different attachment. Corrugated, TuffRib and PBR panels have no raised seam to clamp, so the mounts fasten through the panel into the purlins or framing below and are sealed at each point. That works well when done right, but every attachment is one more spot to watch over the years, just like the roof’s own screws. Follow both the panel maker’s and the mount maker’s instructions.

Put the metal roof on first, then the solar

If your roof is past the middle of its life, replace it before the array goes up. Otherwise, the day the old roof wears out, you are paying to take the solar down and put it back on top of paying for the roof. The classic mistake is a new array on 15-year-old shingles that will need replacing long before the panels do.

Brothers Metal Roofing installs metal roofs, not solar panels, and we do not partner with a solar company. If solar is in your plans, tell us at the estimate so the roof layout and snow guard placement can account for it.

Does solar affect your metal roof warranty?

It can, even with clamps. On our double lock standing seam roofs, solar attached with seam clamps does affect the Double Lock Warranty. No holes go through the panels, but the warranty terms still change. Talk to us before any racking goes on, and get the effect on your warranty in writing.

Snow, solar and metal roofs in Ohio

Solar glass is slick, and so is painted steel. In a western Ohio winter, snow can let go of an array and the metal below it all at once, landing on gutters, walks and anything parked near the eaves. Plan snow guards below the array at the same time as the solar layout, not after the first big snow.

Questions to ask your solar installer

  1. Which clamp or mount will you use, and is it rated for my seam profile?
  2. Will you drill through the roof anywhere, including for wiring?
  3. Who warrants the roof where your equipment attaches?
  4. Where will snow slide, and where should the snow guards go?

Our take. Can you put solar panels on a metal roof? Yes, and standing seam is about the best base for them you can buy. If you are planning solar on an older roof, get the roof sorted first. Call (937) 423-9352 for a free look and a written estimate.

Related questions

Sources

Straight answers

Frequently asked questions

Do solar panels affect a metal roof warranty?

They can, depending on how the array attaches and the warranty terms. On Brothers Metal Roofing double lock standing seam roofs, solar attached with seam clamps does affect the Double Lock Warranty, so talk to your roofer and get the terms in writing before the solar goes on.

Is a metal roof or a shingle roof better for solar?

Standing seam metal is usually better. The array clamps on without holes, and the roof can last 40 to 70 years, so it is far less likely to need replacing before the panels do.

Can thin-film solar go on a metal roof?

Yes. EnergySage notes that standing seam metal roofs are an ideal surface for thin-film solar.

Free estimates · Mon–Fri, 7 AM–5 PM

Let’s look at your roof.

Free inspection and a written estimate. No pressure, and an honest answer on repair vs. replace.

(937) 423-9352
  • 5265 Sebring Warner Rd, Greenville, OH 45331
  • 40-yr Double Lock Warranty
  • 4.7 from 55 Google reviews

Get your free estimate

Fill out our short form and we reply within one business day, usually sooner.

  • Free, written estimate
  • No-pressure roof inspection
  • Honest repair-or-replace advice
Request my free estimate Call (937) 423-9352

Mon–Fri, 7 AM–5 PM

Call nowFree estimate