4.7 · 55 Google reviews Mon–Fri, 7 AM–5 PM Greenville, OH · Serving western Ohio & eastern Indiana

Appearance · Standing seam

What Is Oil Canning on a Metal Roof?

Oil canning is visible waviness or rippling in the flat part of a metal roof panel, the pan between the seams. The National Roofing Contractors Association describes it as irregularities or dimpling of the flat pan of standing seam roofs. It is a cosmetic issue, not a leak or a structural failure, and it shows most on wide, smooth, glossy panels in low-angle sunlight.

By Isaac Smith, Brothers Metal Roofing · Updated November 2026

Close-up of textured black snap lock standing seam panels on a Xenia, Ohio roof

What causes oil canning?

  • Stress in the steel. Coil can carry uneven tension from the mill before it is ever formed into a panel.
  • Forming the seams. Bending the edges puts stress into the flat between them.
  • Heat and cold. Panels grow and shrink with temperature. Pinned too tightly to move, the flat buckles slightly.
  • An uneven deck. Humps and dips in the sheathing telegraph through a smooth panel.
  • Wide, flat, glossy panels. The wider and shinier the flat, the more any wave shows.

Is oil canning a defect?

Not in the sense of a leak. Oil canning does not let water in, weaken the panel or shorten the roof’s life, and NRCA notes that it cannot be totally eliminated from standing seam roofs. The industry treats it as a cosmetic characteristic of flat metal, so ask how any warranty you are offered handles it.

It also changes with the light. A roof that looks dead flat at noon can show ripples in low morning or evening sun, and the same panel can look different on a hot day than on a cold one.

How to reduce oil canning on a metal roof

  1. Choose a heavier gauge. 24-gauge steel is stiffer than 26 and holds a flatter pan. We install both.
  2. Pick a textured finish or striations. Texture, or small ribs formed into the flat, breaks up reflections so waves are hard to see. Our roll-former puts striations into the flat of our standing seam panels, and our Xenia and Lynn roofs both used textured finishes on top of that.
  3. Go lower gloss and narrower. Less shine and a narrower flat both hide waviness.
  4. Start from a flat, solid deck. Sheathing problems get fixed before panels go on. We never install over rotten or damaged decking.
  5. Let the panels move. Standing seam clips hold the panel down while letting it expand and contract.
  6. Handle panels with care. A long panel twisted on the way up carries that stress into the roof. Forming panels on site, cut to length, means no long panels bent riding a truck across the state.

Our standing seam panels are 16 inches wide, striated, and formed on site. Our warranty has no specific oil canning language. We deal with it through installation instead: a flat deck, clips that let the panels move, and careful handling from the roll-former to the roof.

Can oil canning be fixed after the roof is on?

Usually not without replacing panels. Because it is cosmetic, most owners live with mild oil canning. If a panel is badly distorted from damage or poor installation, replacing that panel is the fix. The better time to deal with oil canning is before the roof goes on, by choosing gauge, finish and panel width with your installer.

Our take. Some oil canning is part of how flat metal behaves, and anyone who promises zero is overselling. What you can control is the gauge, the finish, the deck and the crew. Ask us about all four at a free estimate: (937) 423-9352.

Related questions

Sources

Straight answers

Frequently asked questions

Does oil canning cause leaks?

No. Oil canning is a cosmetic waviness in the flat of the panel. It does not open seams or let water in.

Does thicker metal prevent oil canning?

It helps. 24-gauge steel is stiffer than 26-gauge and resists waviness better, but no gauge removes the chance completely.

Is oil canning covered by warranty?

Often not, because the industry treats it as a cosmetic characteristic rather than a defect. Ask your installer in writing how their warranty handles it before you sign.

Free estimates · Mon–Fri, 7 AM–5 PM

Let’s look at your roof.

Free inspection and a written estimate. No pressure, and an honest answer on repair vs. replace.

(937) 423-9352
  • 5265 Sebring Warner Rd, Greenville, OH 45331
  • 40-yr Double Lock Warranty
  • 4.7 from 55 Google reviews

Get your free estimate

Fill out our short form and we reply within one business day, usually sooner.

  • Free, written estimate
  • No-pressure roof inspection
  • Honest repair-or-replace advice
Request my free estimate Call (937) 423-9352

Mon–Fri, 7 AM–5 PM

Call nowFree estimate