Metal roof cost calculator
$14,900 to $29,800
About 1,860 sq ft of roof (18.6 squares)
Prices are Brothers Metal Roofing’s published range for western Ohio and eastern Indiana. Simple roofs tend toward the low end. Valleys, dormers, chimneys and steep pitches push toward the high end. This is a planning number, not a quote.
How to measure your house
- Measure the outside walls at ground level. Length and width, in feet. For a two-story house, the footprint is the ground floor only.
- Add a garage or wing separately. For an L-shaped house or an attached garage, measure the second rectangle and enter it in the garage fields.
- Find the pitch. In the attic, hold a level flat against a rafter, mark 12 inches along the level, and measure straight up to the rafter. Six inches means a 6/12 pitch. Not sure? Try 4/12, 6/12 and 8/12 to see the spread. More in what is the minimum pitch for a metal roof?
How the math works
Add the overhang to each side of the footprint, multiply length by width, then multiply by the pitch factor below. That gives the roof surface in square feet. Divide by 100 to get squares, and multiply by the price per square foot for the cost.
| Pitch | Pitch factor | Roof area per 1,000 sq ft of footprint |
|---|---|---|
| 3/12 | 1.031 | 1,031 sq ft |
| 4/12 | 1.054 | 1,054 sq ft |
| 6/12 | 1.118 | 1,118 sq ft |
| 8/12 | 1.202 | 1,202 sq ft |
| 10/12 | 1.302 | 1,302 sq ft |
| 12/12 | 1.414 | 1,414 sq ft |
Worked example
A 30 by 50 foot ranch with 12-inch overhangs has a footprint of 32 × 52 = 1,664 sq ft. With a 6/12 roof, 1,664 × 1.118 = about 1,860 sq ft of roof, or 18.6 squares. At $8 to $16 per square foot, that is about $14,900 to $29,800 for standing seam. The full breakdown by pitch is in how much is a metal roof on a 1,500 sq ft house?
What a calculator cannot see
- Rotten decking. On a Centerville, Ohio ranch, a large section only showed up once the shingles came off.
- What has to come off. Our Lynn, Indiana job meant tearing off old metal, cedar shake and a flat rubber roof.
- Penetrations. Every chimney, pipe, vent and skylight needs flashing. The Centerville roof had nine pipes and a large chimney.
- Your choices. Double lock or snap lock, 24 or 26 gauge, gutters, guards and snow guards.
Our take. A calculator gets you a planning range. A free written estimate gets you the real number, with the panel, color, warranty and scope spelled out. Call (937) 423-9352 (Mon to Fri, 7 AM to 5 PM).

